R&S Plating has been family owned an operated in the Indianapolis area for over seventy years. Our shop has been run by our family for seven generations, which guarantees you the best service possible. We specialize in Indianapolis Surface Finishing with multiple metals.
We have been finishing surfaces in the same facility, in Indianapolis off of Interstate 70 within the Crossroads of American. We are just a quick drive away, no matter where you are at. Even with all of our growth, we are in the same warehouse 70 years later. There is now over 114,403 business in Indianapolis many of which could benefit from surface finishing, whether it is nuts, bolts or more! R&S finishes surfaces for large companies and even small mom and pop shops. We work with all of Indiana as well as much of the Midwest as well. Our applications range from commercial, industrial, and military uses.
What is Indianapolis Surface Finishing?
When you finish a surface, you are treating the exterior of a piece of metal. The main purpose of surface finishing is to improve the durability and enhance the appearance of the metal piece. Surface finishing is used for a wide variety of reasons, which include:
Increase Durability- Enhanced Appearance
- Improve Electrical Conductivity
- Increase in Chemical Resistance
- Heightened Tarnish Resistance
- More Surface Friction
- Better ability to bond with rubber
- Increased Torque Resistance
- Better Reflectiveness
Types of Indianapolis Surface Finishing
Metal Plating– At our Indianapolis facility, machines are used for chemical baths to coat the surface with a thin coat of another metal. There is a method, called electroplating, that creates a current with electricity that will add a thin layer to the substrate.
Copper Plating– Copper has one of the highest conductivity ratings of all surface finishing. We can add and remove copper finishing. We surface finish shafts, bearings, aircraft parts, flanges, and more.
Passivation Finishing– This surface finishing increases the life of your metal. The process starts with an extreme parts wash. Next, your part will be submerged into a chemical bath that will give it a protective layer. Passivation finishing is completed on feeder bowls, vibratory feeder systems, vent systems, aircraft components, and more.
Hard Chrome Finishing– This finish is known for its durability and resistance to corrosion. We not only surface finish with hard chrome but, we also can remove hard chrome finishing. There is a turn around time of about 5 to 7 days on hard chrome finishes. We often hard chrome finish shafts, aircrafts components, tools, molds, and centrifuge bowls.
Cadmium Surface Finishing– Due to its high corrosion resistance, cadmium finishing is one of the most commonly used. Depending on size, the average project can take as little as 72 hours to complete. The most common cadmium finished items are washers, nuts, magnets, shafts, threaded rods, timing mechanisms, and more.
White Layer– This is used for the removal of brittle layers from nitriding. This process can be done on all sized parts. We refill our tanks before every use to be able to provide you with the best quality treatment possible. We often white layer spacers, shafts, rings, and more!
Zinc Surface Finishing– Zinc finishing is most often used to protect against rust because it is one of the most cost-effective methods. We can wire, rack, or barrel any of your metals.
How to Choose Your Indianapolis Surface Finishing Process?
There are many things to keep in mind while narrowing down your choice. You will want to keep in mind a few things:
Is it Cost Effective? – Depending on the size and number of pieces that you need to be finished, there may be a cost difference based on the surface finishing you choose. Contact us to discuss the best finish for the materials that you need.
What is the turnaround time? -Certain finishing types may have a longer application time than others. It is always a good idea to let us know if you have a specific turn around time that you need.
What is the metal hardness of your metal? – The metal hardness of your piece can be determined by the HIC or Rockwell of your item. This will help us know baking times and temperature of hydrogen or stress relief.
If you need more help determining the best process for you, reach out to one of our specialists at R & S Plating, in Indianapolis.
Contact Us For Your Indianapolis Surface Finishing Needs
Are you in need of surface finishing for any of your products? Feel free to contact one of our Indianapolis specialists, at R & S Plating, to learn more! We cannot wait to assist you with your finishing needs.